Stamping Parts Manufacturers

Performing a bathroom faucet repair Basin Faucet Manufacturers is pretty straightforward. You just need a few moments and a Philips screwdriver and you can solve the leak without even the need for a plumber.

As with all things, faucets do become brittle and will eventually crack as time goes by. This along with constant usage will eventually cause leaks. Normally these leaks are just minor and average about a drop a minute. However, we don�t notice that if this continues, you are actually wasting a lot of water in the process. Some of us even tighten the head, thinking that it might stop the leak. Actually what this does is just increase the wear and tear and can even damage your faucet.

So let us now go to the steps you will take to start your bathroom faucet repair.

1. Start {|off) by turning the water off. Not just turning the cap but you must completely shut off the valve itself. This is normally seen underneath your faucet.

2. Remove the faucet cap with your Philips screwdriver and then remove the handle from the fixture as well. Make sure not to handle this very carefully as not to scratch the surface. Also make sure you don�t force you screwdriver, otherwise you might end up with a loose thread and will require other tools.

3. Remove the nut from under the handle and unscrew the remaining rod and stem.

4. Clean out any dirt from the cavity and make sure to replace it if it is heavily corroded.

5. Remove the screw holding the washer in place and take out the washer.

6. Bathroom Accessories Suppliers Make sure to look for a washer that matches your bathroom faucet model.

7. Finally once you have bought some new materials, insert the new washer, replace the screw and insert stem in the middle of all of them, turning it counter clockwise until it tightens.

8. Once everything is set, you may then reattach the handle and snap it into place.

The bathroom faucet repair should take care of the leak most of the time. Sometimes, your washer seat might be heavily damaged and will still cause your water to leak. When this occurs, consider finding a new washer seat or just hire a professional plumber for some advanced cases.